Alloy Steel Flanges

Low Alloy Slip-On and ASTM A182 Blind Flange manufacturer in India

Alloy steel flanges are made from different alloys of steel. These flanges have a composition of nickel, chromium, molybdenum along with a few trace elements. Some of the characteristics of these flanges include excellent corrosion resistance, high weldability, durability, resistance to pitting corrosion, and long-lasting products. This alloy has properties that are not present in regular carbon steel. They are widely used in water lines, oil, and gas, chemical plants, processing plants, food production systems, etc. We are the top Alloy Steel Flanges manufacturers in India, who focus on creating the best products at reasonable rates.

Low AS Forged Flange Supplier in India

The ANSI B16.5 Alloy Steel Slip On Flange is a cost-effective flange. This flange can be easily attached to a pipe by sliding it and placing it in the right place. The Alloy Steel Plate flange is a flat or circular disk that is welded on the end of a pipe. These flange plates have bolt holes all around their perimeter which are used in creating joints, tees, or junctions. We manufacture all ASME SA 182 AS Pipe Flange under strict supervision from our experienced and knowledgeable team members. Our team members use the best raw materials using the best technology following international and national standards.

The ANSI B16.5 Alloy RTJ Flanges is used in high-temperature and pressure situations. The flange is used as a metal-to-metal seal in between mating flanges. The Low AS Forged Flange is made of different alloys with small additions. These additions help give this metal different types of desirable properties, which, help in performance and overall durability. All our products can be customized into different shapes and sizes to suit all your needs. If you have any queries regarding our products or pricing, contact us for more information.

Specification Chart of Alloy Steel Flanges

Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Pressure Rating ANSI 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS
Pressure Calculation in DIN 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar
Production technique Forged, Heat treated and machined
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Coating Anti-rust Paint, Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent
Most common types Forged / Threaded / Screwed / Plate
Uses & application
  • Nuclear power (mostly seamless).
  • Bitumen upgraders.
  • Petrochemicals and acids.
  • Heavy oil refineries.
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Equipment Bending machine, Pushing Machine,Press machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Export to Ireland, Brazil, Thailand, Egypt, Oman, Dubai, Singapore, Indonesia, Ukraine, Korea, Iran, India, Saudi Arabia, Spain, Canada, USA, Peru, etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • German (DIN)
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • British standard (BS)
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Test Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector
Standards API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092

ASME SA 182 AS Pipe Flange Price List

Alloy Steel Blind Flange Price Per Piece in India AS Weld Neck Flange Price in INR Alloy Threaded Flange Price in UAE Dirham
1-1/2″ AS Threaded Flange 6203.36 UAE Dirham 328.48
1-1/2″ Alloy F5 blind flange 4295.11 UAE Dirham 227.43

Alloy Steel Flanges Pressure And Temperature Ratings

ANSI/ASME B16.34 ANSI PRESSURE RATING
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 265 695 925 1390 2085 3470 5785
200 260 680 905 1360 2035 3395 5660
300 230 655 870 1305 1955 3260 5435
400 200 640 855 1280 1920 3200 5330
500 170 620 830 1245 1865 3105 5180
600 140 605 805 1210 1815 3025 5040
650 125 590 785 1175 1765 2940 4905
700 110 570 755 1135 1705 2840 4730
750 95 530 710 1065 1595 2660 4430
800 80 510 675 1015 1525 2540 4230
850 65 485 650 975 1460 2435 4060
900 50 450 600 900 1350 2245 3745
950 35 280 375 560 845 1405 2345
1000 20 165 220 330 495 825 1370

Alloy Steel Blind/ Weld Neck Flanges weight chart

Dimensions of Low AS Forged Flange

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 PN14 95 67 4 M12 14
AS 2129 Flange Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ANSI B16.5 ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14

ASME SA 182 AS Pipe Flange Weight Chart

CLASS Nominal Pipe Size Slip On Flange Threaded Flange Socket Weld Flange Lap Joint Flange Blind Flange Weld Neck Flange
150 lb ½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
300 lb ½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1 3 3 3 3 4 4
4.5 4.5 4 4.5 6 5
6.5 6.5 6 6.5 7 7
2 7 7 7 7 8 9
10 10 10 10 12 12
3 13 14 13 14.5 16 18
17 17 17 17 21 20
4 23.5 24 22 24 28 26.5
5 29 31 28 28 37 36
6 39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
400 lb ½ 2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
4.5 4.5 4.5 4.5 6 4.5
6.5 6.5 6.5 6.5 8 8
2 8 8 8 8 10 10
12 12 12 11 15 14
3 15 15 15 14 20 18
21 21 21 20 29 26
4 26 26 26 25 33 35
5 31 31 31 29 44 43
6 44 44 44 42 61 57
8 67 67 67 64 100 89
10 91 91 91 110 155 125
12 130 130 130 152 226 175
14 191 191 191 210 310 233
16 253 253 253 280 398 295
18 310 310 310 345 502 360
20 378 378 378 420 621 445
22 405 405 405 455 720 505
24 539 539 539 615 936 640
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
600 lb ½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1 4 4 4 4 4 4
5 5 5 5 6 6
7 7 7 7 8 8
2 9 9 9 9 10 12
13 13 13 12 15 18
3 16 16 16 15 20 23
21 21 21 20 29 26
4 37 37 37 36 41 42
5 63 63 63 63 68 68
6 80 80 80 78 86 81
8 115 15 15 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
900 lb ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 7.5 7.5 7.5 7.5 9 8.5
10 10 10 10 10 10
14 14 14 14 14 14
2 22 22 22 21 25 24
31 31 31 25 32 31
3 36 36 36 29 35 36
4 53 53 53 51 54 53
5 83 83 83 81 87 86
6 110 110 110 105 115 110
8 172 172 172 190 200 187
10 245 245 245 277 290 268
12 326 326 326 371 415 372
14 400 400 400 415 520 562
16 459 459 459 488 619 685
18 647 647 647 670 880 924
20 792 792 792 868 1107 1164
24 1480 1480 1480 1659 2099 2107
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
1500 lb ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 8 8 8 8 9 9
10 10 10 10 10 10
14 14 14 14 14 14
2 25 25 25 25 25 25
36 36 36 35 35 36
3 48 48 48 47 48 48
4 73 73 73 75 73 73
5 132 132 132 140 140 132
6 165 165 165 170 160 165
8 260 260 260 286 302 275
10 436 436 436 485 510 455
12 667 667 667 749 775 690
14 940 940 940 890 975 940
16 1250 1250 1250 1250 1300 1250
18 1625 1625 1625 1475 1750 1625
20 2050 2050 2050 1775 2225 2050
24 2825 2825 2825 2825 3625 3325
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
2500 lb ½ …. 7 …. 7 7 8
¾ …. 9 …. 8 10 9
1 …. 12 …. 12 12 13
…. 18 …. 17 18 20
…. 25 …. 24 25 28
2 …. 38 …. 37 39 42
…. 55 …. 53 56 52
3 …. 83 …. 80 86 94
4 …. 127 …. 122 133 146
5 …. 210 …. 204 223 244
6 …. 323 …. 314 345 378
8 …. 485 …. 471 533 576
10 …. 925 …. 897 1025 1068
12 …. 1300 …. 1262 1464 1608

Size Range of ASTM A182 Low Alloy Steel flanges

Nominal Pipe Size Outside Diameter of Flange Thickness of Flange Diameter of Raised Face Diameter of Hub at Base Length Thru Hub Diameter or Bore Diameter of Hub at Bevel Radius of Fillet Depth of Socket
Welding Neck Slip-On Threaded Socket Lap Joint Slip-on Socket Lap Joint
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2
We have Huge Stock of Alloy Steel Plate and Slip On Flanges

Types Of Low Alloy Steel Flanges

Chemical Element of ANSI B16.5 Alloy Steel Slip On Flange

Grade C Mn Si P S Cr Mo
F1 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65
F5 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 4-6 0.44-0.65
F9 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 8-10 0.9-1.1
F11 0.5-0.15 0.3-0.6 0.5-1.0 0.03 0.03 1.0-1.5 0.44-0.65
F12 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65
F22 0.50.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65
F91 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 8-10 0.9-1.1

Mechanical Properties of Alloy Steel Blind Flanges

Grade Tensile Strength Yield Strength (0.2%Offset) Elongation
F1 275 485 20 %
F5 275 485 20 %
F9 380 585 20 %
F11 205 415 20 %
F12 275 485 20 %
F22 205 415 20 %
F91 380 585 20 %
View Chrome Moly Alloy Steel Socket weld Flanges specification, Check dimension of ANSI B16.5 Alloy RTJ Flanges

ANSI B16.5 Alloy RTJ Flanges Equivalent Material

Material Group Common Name Type UNS Forging Spec. Casting Spec. Equivalent DIN DIN W. No Application
Low AS Moly Steel C-1/2Mo K12822 A182-F1 cl2 A217-WC1 15M03 1.5415 Up to 470ºC* (875ºF)
AS Chrome Moly 1.1/4Cr-1/2Mo K11572 A182-F11 cl2 A217-WC6 13CRM044 1.7335 Up to 593ºC (1100ºF)
2.1/4Cr-1Mo K21590 A182-F22 cl3 A217-WC9 10CRM0910 1.7380 Up to 593ºC (1100ºF), HP steam
5Cr-1/2Mo K41545 A182-F5/F5a A217-C5 12CRMO195 1.7362 High temp refinery service
9Cr-1Mo K90941 A182-F9 A217-C12 X 12 CrMo 9 1 1.7386 High temp erosive refinery service
9Cr-1Mo-V A182-F91 A217-C12A X 10 CrMoVNb 9 1 1.4903 High pressure steam

Look who buy from Us and What

42CrMo alloy steel flange Canada, Dammam -KSA, Philippines, Belgium
Forged Flange Alloy Steel TH Flanges 4''1500LB SCH160 Malaysia, Qatar, Europe, Thailand
Alloy steel plate type forged threaded flange Japan, Czechia, Thailand, Malaysia
Alloy Steel Slip On RF 5'' 600LB Forged Steel Flange Colombia, Malaysia, Bangladesh, Finland
Alloy Steel WN RF Flange Taiwan, South Africa, Kuwait, Brazil
Alloy steel ASME/ANSI B16.7 BLIND FLANGE South Korea, Bahrain, Singapore, Singapore
Alloy steel 6" plate flat flange Indonesia, Philippines, UK, Nigeria
2 inch pipe flange forging Alloy Steel France, Oman, Hong Kong, UAE
ASTM A182 Low Alloy Steel flanges Germany, Chile, Iran, Singapore
ASME SA 182 AS Pipe Flange USA, Netherlands, Romania, Ellington -United States
alloy flange 2-1/2"inch class300 lap joint loose flange LJW ANSI B16.5 Saudi Arabia (KSA), Egypt, Malaysia, Singapore
ANSI b16.5 150 lb 300 lb 600lb Alloy Steel Pipe Flange sorf Flange South Africa, United Kingdom -UK, Los Alamos -Mexico, Malaysia
Alloy Steel Flange, Size: 0-1 inch and 1-5 inch Australia, Sweden, NY 12203 (USA), China
Alloy Steel Raised Face Flange Malaysia, UK, Malaysia, Philippines
Alloy Steel Tongue & Groove Flange Italy, Philippines, Poland, Malaysia
High Pressure Forged Alloy Steel Pipe Flanges Turkey, Europe, Canada, Dubai
ANSI B16.5 Weld Neck alloy steel pipe flanges Europe, United Arab Emirates (UAE), Norway, Malaysia
pn16 alloy steel forged flange Malaysia, Malaysia, Russia, UAE
ANSI B 16.5 Alloy Steel Blind Flange For Pressure Vessel Spain, Singapore, Mexico, UK