Duplex 2205 Plate

ASTM A240 Type 2205 Sheet and UNS S32205 Plate supplier in India.

Duplex is an austenitic ferrite portion of a mixed microstructure. Duplex 2205 Sheet is an enhanced nitrogen sheet, which is made up of high amounts of chromium and molybdenum. This makes this sheet highly corrosion-resistant at the same time, provides it with good strength and durability. The ASTM A240 Type 2205 Plate can be used in place of expensive alloys. These plates have higher ductility as compared to stainless ferritic steel grades. These Duplex 2205 Stainless Steel Sheet are widely used in chemical processing, transport, and storage of oil and gases, offshore rigs, etc. Over the past decade, we have been the leading manufacturer of Duplex 2205 Sheet. Our goal is to produce the best products at the most reasonable rates for all. We are amongst a few Duplex Plate suppliers who offer to provide sheets of different sizes according to your requirements.

Refer Duplex 2205 Stainless Steel Sheet Price, Ready stock of 2205 SS hot rolled coil at reasonable cost

Coils can be produced by cold or hot rolling processes. The 2205 SS hot rolled coil is produced at high temperatures. This allows the material to be easily formed and easy to work with. The SAF 2205 Strip, when hot-rolled have a thickness of up to 12.7mm while it has a thickness of up to 1.50mm if they are cold-rolled. Alloy 2205 Foil consists of ferrite and austenitic of equal proportion. This allows them to be used in wrapping tools when they are heat-treated.

Our experienced staff uses the latest technology while using the best raw materials to produce the duplex stainless steel plate along with all our other products. This is done following national and international standards. If you have any questions about our Duplex 2205 Sheet or other products, contact us for more information.

Spec Chart of Duplex 2205 Sheet / Plate

ASTM Specification ASTM A240 / ASME SA240
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Finish Cold rolled sheet (CR), 2B, 2D, Hot rolled plate (HR), BA NO(8), SATIN (Met with Plastic Coated)
Value Added Service Annealed, Pickling, Polish, Cladding, Rolling, Cutting, Heat Treatment, Bending, Forging, Minor Fabrication Etc.
Profiling

To provide a full profiling service we use numerous profiling methods including:

  • Oxy-propane Flame Cutting
  • Plasma Plate Cutting
  • Laser Plate Cutting
Thickness 0.1mm to 100 mm Thk
Stock in form of Plate, Sheet, hot rolled, cold rolled, annealed, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Coils, descaled, sheared, tread plate, Foils, Rolls, Plain Sheet, Flat Shim, Blank (Circle), soft annealed, Checker Plate
Width 10-2500mm
Hardness Half Hard, Quarter Hard, Soft, Hard, Spring Hard etc.
Test Report
  • Raw Materials Certificate
  • Excellent corrosive resistance, good thermal resistance
  • Strict Control from Raw Material to Finished
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • Customer support after-sales service
  • High special strength, high melt point
Temper Annealed
Export to Brazil, Singapore, Indonesia, Canada, India, Ukraine, Thailand, Egypt, Ireland, Saudi Arabia, Oman, Dubai, Korea, Iran, Spain, USA, Peru, etc
We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

ASTM A240 Type 2205 Plate Price List

Duplex 2205 Sheet Price in India ASTM A240 Type 2205 Plate Price in INR SAF 2205 Sheet Price in USD Duplex 2205 Stainless Steel Plate Price in UAE Dirham
SHEET/PLATE DUPLEX 2205 (SIZE: THK:06 TO 08 X WIDTH: 1500 TO 2000 X LENGTH: 2555 TO 4000 MM) Rs. 110 1.47 USD UAE Dirham 5.39
DUPLEX STAINLESS STEEL HOT ROLLED SHEET GRADE 2205 WIDTH 2000 MM THK 6 MM Rs. 304 4.06 USD UAE Dirham 14.90

Chemical Structure of SAF 2205 Strip

C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 - 3.5 22.0 - 23.0 0.03 4.5 - 6.5 0.14 - 0.2 Bal

Get a Quote of ASTM A240 Type 2205 Plate. View SAF 2205 Cold Rolled Sheet Sizes

Mechanical Properties Chart of Alloy 2205 Foil

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi - 80000 , MPa - 550 Psi - 116000 , MPa - 800 15 %

Equivalent material of SA-240 Duplex 2205 Shim Stock

STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462

Most frequent types of ASTM A240 Type 2205 Plate / Sheet

Buy Certified & Tested SA-240 Duplex 2205 Shim Stock, Check Duplex Steel S31803 Strip Dimensions

ASTM A240 Type 2205 Specified Tensile Properties

Ultimate Tensile Strength, ksi Minimum
.2% Yield Strength, ksi Minimum
Hardness Max.
95
65
31 Rockwell C

Duplex 2205 Stainless Steel Sheet Physical Properties

Grade

Density
(kg/m3)

Elastic
Modulus

(GPa)

Mean Co-eff of Thermal
Expansion (μm/m/°C)

Thermal
Conductivity (W/m.K)

Specific
Heat
0-100°C

( J/kg.K)

Electrical
Resistivity
(nΩ.m)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

2205

782

190

13.7

14.2

-

19

-

418

850

2205 Sheet Welding

  • Shielded metal arc welding (SMAW)
  • Resistance welding
  • Laser welding
  • Submerged arc welding (SAW)
  • Gas tungsten arc welding TIG (GTAW)
  • Plasma arc welding (PAW)
Purchase Alloy 2205 Foil at discounted rate, Top-notch stockist of UNS S32205 Perforated Sheet

2205 Stainless Plate Weight Chart

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

Alloy 2205 Plate Sizes

Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.625"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

SAF 2205 Cold Rolled Plate Dimensions

Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524

Imperial Dimensions

Surface finish Gauge (in) Width (in)
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
2D – Cold rolled, heat treated, pickled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

We supply 2205 plate in below countries

2205 Duplex stainless steel coil Malaysia, Colombia, China, Sweden
6mm duplex stainless steel sheet 2205 Malaysia, Europe, UAE, United Kingdom -UK
2205 duplex stainless steel sheet 2B finish Thailand, Germany, Malaysia, Czechia
DIN 1.4462 Duplex 2205 Hot Rolled 10mm Plate Poland, Canada, Ellington -United States, UK
2205 Duplex 28 Gauge Sheet For Kitchen Wall Iran, Italy, Singapore, Chile
3mm - 300mm Duplex Stainless Steel Sheet Europe, France, Thailand, Qatar
2205 duplex steel plate 8mm Hong Kong, Malaysia, UAE, Oman
Plate 2205 Surface Finish NO.1 Philippines, Indonesia, Belgium, Dammam -KSA
2205 duplex prime quality cold rolled stainless steel sheet Romania, Japan, Malaysia, Europe
duplex 2205 25mm thick stainless steel plate/sheet NY 12203 (USA), South Korea, Malaysia, Singapore
ASME SA 240 UNS S32205 Sheet Kuwait, Saudi Arabia (KSA), Brazil, South Africa
1.2mm thickness 2B surface 2205 duplex Stainless Steel sheet Bangladesh, USA, Finland, Malaysia
Supercold Mirror 2205 Duplex Plate Canada, Malaysia, Singapore, Philippines
0.3mm Thick Duplex Stainless Steel Sheet Singapore, South Africa, Singapore, Bahrain
Uns S32205 Sheet 1.5*980mm Russia, Malaysia, Dubai, Netherlands
duplex 2205 plate 2B BA No.8 surface Norway, Turkey, Malaysia, United Arab Emirates (UAE)
Stainless Steel Hot Rolled Sheets Grade Duplex 2205 (Size:10.00 Mm X 1500 Mm X 6000 Mm UK, Australia, Nigeria, Philippines
Duplex Stainless Steel Hot Rolled Sheet Grade 2205 Width 1500 Mm Thk 10 Mm Los Alamos -Mexico, Taiwan, Philippines, Malaysia
hot rolled 2mm 2205 duplex SS sheet Mexico, Spain, UK, Egypt