Ashtapad Overseas

  • Call

    +91-22-23841700

  • Email

    export@ashtapad.com

Hastelloy C276 Pipe Fittings

  Home   ⁄   Hastelloy C276 Pipe Fittings

Manufacturer of Nickel C276 Elbow in India, Buy ASTM B366 UNS N10276 Tee at Factory Price

Hastelloy C276 Pipe Fittings

Hastelloy C276 is a nickel, molybdenum, and chromium wrought alloy. Hastelloy C276 fittings show high resistance to corrosion along crevice & pitting corrosion. The fittings produced good formation and welding applications. These fittings are widely used in paper, chemical industries, pollution control, pulp industries and waste management systems. Over the last decade, we have been the leading manufacturer and supplier of ASME B16.5 C276 Alloy Cross. Our aim is to produce top-quality products at reasonable rates for all.

The ASTM B366 UNS N10276 Reducer helps change the diameter of a pipe by reducing it into smaller sizes. This reducer can help adapt different pipe sizes. The Nickel C276 Elbow is used to gradually bend the flow in a piping system. They mostly come with an angle of 45 or 90 degrees. These elbows are available in NPS ½ to NPS 48. We manufacture C276 Hastelloy Pipe Fittings along with all our products under strict supervision from our experienced and knowledgeable team members. Our team members use the best raw materials using the best technology following international and national standards.

The Alloy C276 Reducing Tee has 3 female openings which, help increase or decrease flow in the piping systems. In the reducing tee, one branch port size is smaller than the other ports of the run thereby reducing flow through that section. All our products can be customized into different shapes and sizes to suit the specific requirements of our clients. If you have any queries regarding our Hastelloy C276 fittings or their pricing, contact us.

Hastelloy C276 Fittings

Hastelloy C276 Fittings

ASTM B366 UNS N10276 Reducer

ASTM B366 UNS N10276 Reducer

Nickel C276 Elbow

Nickel C276 Elbow

Table of Contents


Hastelloy C276 Pipe Fittings

Stockist of High Quality C276 Hastelloy Pipe Fittings in Mumbai, With Hardened & Tempered Condition

Hastelloy C276 Pipe Fittings Specification

Hastelloy C276 Pipe Fittings Specification

Hastelloy C276 Buttweld Fittings Sizes

  • Seamless : 1/2" - 24"
  • Welded : 24 - 96"

Nickel Alloy C276 Elbow Size

  • 1/2 to 48


Hastelloy 2.4819 Tee Schedule

  • 5 to XXS

DIN 2.4819 Reducer Dimensional Standard

  • ASME B16.9

Hastelloy Alloy C276 Cap Density

  • 8.47 g/cm3
  • 0.306 lb/in.3

Alloy C276 BW Fittings Melting Range

  • 2470 - 2575 °F
  • 1354 - 1413 °C

UNS N10276 Stub End Coating

  • FBE coated
  • Varnished
  • Anti rust light oiling
  • PE coating
  • Hot-dip galvanizing
  • Back painting

2.4819 Hastelloy C276 Pipe Bend American standard

  • MSS-SP-43
  • ANSI / ASME B16.9
  • MSS-SP-83
  • ANSI/ ASME B16.25
  • ANSI/ ASME B16.28
  • MSS-SP-95

Nickel C276 Cross manufacturing technique 

  • Mandrel
  • Hot forming

UNS 0276 Buttweld Pipe Fittings JIS standard

  • JIS B2313
  • JIS B2312

EN 2.4819 Welded Fittings Testing Methods

  • Magnetic Particle Examination
  • Hyrdrostatic test
  • Positive Material Identification
  • HIC tested
  • Ultrasonic test

Alloy Hastelloy C276 Bend Radius

  • 3D
  • 4D
  • 5D
  • 6D
  • 8D
  • 10D

Werkstoff NR. 2.4819 Pipe Bend Angle

  • 15°
  • 22.5
  • 30°
  • 45°
  • 60°
  • 90°
  • 135°
  • 180°

Hastelloy C276 Fittings Types

  • Haynes Alloy C276 Pipe Bend
  • EN 2.4819 Stub End
  • C276 Hastelloy Reducer
  • ASME SB366 N10276 Cross
  • UNS 0276 Elbow
  • Nickel C276 Tee
  • ASTM B366 UNS N10276 Cap

Requirements Meet for Alloy C276 Butt Welded Fittings

  • NACE MR0103
  • HIC tested
  • NACE TM-0284
  • Sour service
  • IBR
  • MTC EN 10204 3.1/ 3.2 certificate
  • ISO 15156
  • NORSOK
  • NACE MR0175

C276 Hastelloy Pipe Bending Method

  • Roll Bending
  • Hot Induction Bending
  • Mandrel Bending
  • Rotary Draw Bending
  • Ram-Type Bending






Marking for Haynes Alloy C276 Welded Pipe Fittings

  • Dimensional standard
  • Manufacturers name
  • Grade
  • Size
  • Heat number

NW 0276 Concentric Reduce Packaging

  • Carton Box
  • Wooden Pallet
  • Custom
  • Wooden Cases




Hastelloy C276 Swage Nipple suitable fluids

  • Air
  • Gas
  • Water
  • Oil
  • Steam










Types of Alloy C276 Pipe Bend

  • Alloy C276 BW Fittings Melting Range
  • ASTM B366 N10276 5d Pipe Bend
  • Hastelloy C276 L Bend
  • ASME SB366 UNS N10276 Welded Pipe Bend
  • Werkstoff Nr. 2.4819 J Bend
  • Hastelloy Alloy C276 Short Radius Bend
  • DIN 2.4819 Hot Induction Bend
  • Alloy C276 Seamless Pipe Bend
  • Alloy C276 Piggable Bend
  • 2.4819 Hastelloy C276 2.5d Pipe Bend
  • Hastelloy 2.4819 Mitered Pipe Bend
  • Nickel Alloy C276 Return Bend
  • Alloy Hastelloy C276 22d Pipe Bend
  • Wnr 2.4819 10d Pipe Bend
  • UNS N10276 Long Radius Bend
  • NW 0276 3d Pipe Bend

Types of Hastelloy C276 Elbow


  • Haynes Alloy C276 8d Elbow
  • EN 2.4819 Seamless Elbow
  • C276 Hastelloy Welded Elbow
  • ASME SB366 N10276 Reducing Elbow
  • 180° Short Radius UNS 0276 Elbow
  • 45° Short Radius Nickel C276 Elbow
  • ASTM B366 UNS N10276 Long Radius Elbow
  • 60° ASTM B366 N10276 Elbow
  • 180° Hastelloy C276 Elbow
  • 180° Long Radius ASME SB366 UNS N10276 Elbow
  • 90° Werkstoff Nr. 2.4819 Elbow
  • 45° Hastelloy Alloy C276 Elbow
  • 45° Long Radius DIN 2.4819 Elbow
  • Alloy C276 5d Elbow
  • Alloy C276 1d Elbow
  • 120° 2.4819 Hastelloy C276 Elbow
  • 90° Short Radius Hastelloy 2.4819 Elbow
  • 30° Nickel Alloy C276 Elbow
  • 22.5 Degree Alloy Hastelloy C276 Elbow
  • Wnr 2.4819 Short Radius Elbow
  • UNS N10276 1.5d Elbow
  • NW 0276 3d Elbow
  • Haynes Alloy C276 2d Elbow
  • 90° Long Radius EN 2.4819 Elbow

Types of Nickel Alloy C276 Tee

  • C276 Hastelloy Buttweld Tee
  • ASME SB366 N10276 Lateral Tee
  • UNS 0276 Barred Tee
  • Nickel C276 Equal Tee
  • ASTM B366 UNS N10276 Straight Tees
  • ASTM B366 N10276 Y Tee
  • Hastelloy C276 Reducing Tee
  • ASME SB366 UNS N10276 Saddle Tee
  • Werkstoff Nr. 2.4819 Reducing Outlet Tees
  • Hastelloy Alloy C276 Swept Tee



















Hastelloy Alloy C276 Cap and Stub End

  • DIN 2.4819 Short Stub End
  • Alloy C276 Lap Joint Stub End
  • Alloy C276 Collar
  • 2.4819 Hastelloy C276 Butt Welded Hemi-head Pipe Cap
  • Hastelloy 2.4819 Long Stub End

Types of Alloy C276 Cross 

  • Nickel Alloy C276 Straight Crosses
  • Alloy Hastelloy C276 Reducing Outlet Crosses
  • Wnr 2.4819 Unequal Cross
  • UNS N10276 Equal Cross


Types of Nickel C276 Swage Nipple

  • W 0276 Eccentric Swage Nipple
  • ASTM B366 UNS N10276 Concentric Swage Nipple

Types of Alloy Hastelloy C276 Reducer

  • ASTM B366 N10276 Eccentric Reducer
  • Hastelloy C276 Concentric Reducer


End types of ANSI B16.9 Hastelloy C276 Tee

  • Beveled Both Ends
  • Treaded Both Ends
  • Plain large end
  • Treaded large end
  • Beveled small end
  • Plain small end
  • Treaded small end
  • Plain Both Ends
  • Beveled large end

ASTM B366 UNS N10276 Elbow Equivalent Standard

  • UNS : N10276
  • EN : NiMo16Cr15W
  • WERKSTOFF NR. : 2.4819
  • OR : ЭП760
  • JIS : NW 0276
  • GOST : ХН65МВУ
  • DIN 17744



Tensile Strength

  • 790 Mpa

Yield Strength

  • 355 Mpa


Specific Heat

  • 0.102 Btu/lb•°F

Thermal Conductivity

  • 427 W/m•°C

Alloy C-276 Fittings Shear Modulus

  • 79 Gpa

Nickel Alloy C276 Fittings Young's Modulus

  • 205 Gpa

Nickel Alloy C276 Long Radius Elbow Value Added Services

  • Forging
  • Rolling
  • Pickling
  • Cladding
  • Bending
  • Heat Treatment
  • Polish
  • Cutting

WPHC276 Buttweld Reducer Application

  • Off-Shore
  • Gas Processing
  • Chemical Equipment
  • Oil Drilling Companies
  • Pharmaceuticals
  • Petrochemicals
  • Pulp and Paper Industry
  • Condensers


Check Price of C276 Hastelloy Pipe Fittings

Hastelloy C276 Fittings Price in India C276 Hastelloy Pipe Fittings Price in INR Nickel C276 Pipe Fittings Price in USD Hastelloy C276 Fittings Price in UAE Dirham
PIPE FITTING -0.750IN,CAP-BUTTWELD,HASTELLOY C- 276 PER ASTM B366 Rs. 5,573 74.38 USD UAE Dirham 273.20
PIPE FITTINGS- 2 x 2 TEE- EQUAL, BUTTWELD, HASTELLOY C-276 PER ASTM B366 Rs. 16,893 225.45 USD UAE Dirham 828.12

Check ASTM B366 UNS N10276 End Cap Chemical Composition and Hastelloy Din 2.4819 Buttweld Fittings Dimensions

Chemical Structure of ASTM B366 UNS N10276 Reducer

C :
0.010 max

Si :
0.08 max

Co :
2.50 max

Cr :
14.50 – 16.50

Mn :
0.50 max

Mo :
15 - 17


Mn :
1.0 max

Ni :
50.99 min*

Fe :
4 - 7

P :
0.04 max


Mechanical Analysis of Nickel C276 Elbow

Element Density Mechanical Analysis of Nickel C276 Elbow Yield Strength (0.2%Offset) Elongation
8.89 g/cm3
  • 52000 Psi
  • 355 MPa
Hastelloy C276 Melting Point Tensile Strength 40 %
  • 2500 °F
  • 1370 °C
  • 115000 Psi
  • 790 MPa

Material Equivalent of Alloy C276 Reducing Tee

STANDARD Europe North America WERKSTOFF NR. OR Japan Russia
Hastelloy C276 NiMo16Cr15W N10276 2.4819 ЭП760 NW 0276 ХН65МВУ

Various Types of Hastelloy C276 Pipe Fittings

Alloy C276 Reducing Tee

Alloy C276 Reducing Tee

C276 Hastelloy Pipe Fittings

C276 Hastelloy Pipe Fittings

ASTM B366 UNS N10276 End Cap

ASTM B366 UNS N10276 End Cap

Hastelloy DIN 2.4819 Buttweld Fittings

Hastelloy DIN 2.4819 Buttweld Fittings

Nickel Alloy C276 Concentric Reducer

Nickel Alloy C276 Concentric Reducer

ASME B16.5 C276 Alloy Cross

ASME B16.5 C276 Alloy Cross

UNS N10276 Stub End

UNS N10276 Stub End

Nickel C276 Short Radius Elbow

Nickel C276 Short Radius Elbow

Nickel Alloy JIS NW 0276 Piggable Bend

Nickel Alloy JIS NW 0276 Piggable Bend

MSS-SP75 Big Size 16-60' Hastelloy C-276 ASTM B366 N10276 Long Radius Elbow

MSS-SP75 Big Size 16-60" Hastelloy C-276 ASTM B366 N10276 Long Radius Elbow

ASTM B366 Alloy C276 Seamless Fittings

ASTM B366 Alloy C276 Seamless Fittings

ASME B16.9 C276 Hastelloy End Cap

ASME B16.9 C276 Hastelloy End Cap

DIN 17744 Weld Fittings

DIN 17744 Weld Fittings

straight tee 5000psi 14mm c-276 hastelloy high pressure

straight tee 5000psi 14mm c-276 hastelloy high pressure

ASTM B366 Hastelloy C276 Eccentric Reducer

ASTM B366 Hastelloy C276 Eccentric Reducer

Hastelloy C-276 2.4819 LR SR 3D 5D Elbow

Hastelloy C-276 2.4819 LR SR 3D 5D Elbow

Supplier of Nickel Alloy C276 Concentric Reduce, Call Now for Enquiry of ASME B16.5 C276 Alloy Cross Free Sample, View Dimension

C276 Hastelloy Fittings Dimensions

NPS OD 90° Elbows 45° Elbows 180° Returns
inch millimeter SR LR LR LR
Center to Face Center to Face Radius Center to Face Back to face Center to Center
inch inch inch inch inch inch
1/2 0.84 21.3   1-1/2   5/8 1-7/8 2
3/4 1.05 26.7   1-1/8   7/16 1-11/16 2-1/4
1 1.315 33.4 1 1-1/2   7/8 2-3/16 3
1-1/4 1.66 42.2 1-1/4 1-7/8   1 2-3/4 3-3/4
1 -1/2 1.9 48.3 1-1/2 2-1/4 3 1-1/8 3-1/4 4-1/2
2 2.375 60.3 2 3 4 1-3/8 4-3/16 6
2 1/2 2.875 73 2-1/2 3-3/4 5 1-3/4 5-3/16 7-1/2
3 3.5 88.9 3 4-1/2 6 2 6-1/4 9
3-1/2 4 101.6 3-1/2 5-1/4 7 2-1/4 7-1/4 10-1/2
4 4.5 114.3 4 6 8 2-1/2 8-1/4 12
5 5.563 141.3 5 7-1/2 10 3-1/8 10-5/16 15
6 6.625 168.3 6 9 12 3-3/4 12-5/16 18
8 8.625 219.1 8 12 12 5 16-5/16 24
10 10.75 273.1 10 15 15 6-1/4 20-3/8 30
12 12.75 323.9 12 18 18 7-1/2 24-3/8 36

Weight Chart of Nickel C276 Pipe Fittings

Nominal Pipe Size Kilogram LBS
2 - 1½ .59 1.3
2 - 1 .5 1.1
2½ - 2 1.11 2.45
2½ - 1¼ .95 2.1
3 - 2½ 1.88 4.15
3 - 1½ 1.45 3.2
3½ - 3 2.72 6
3½ - 2 2.04 4.5
4 - 3½ 3.72 8.2
4 - 3 3.4 7.5
4 - 2½ 4.76 1 .5
4 - 2 2.7 5.95
5 - 4 5.94 13.1
5 - 3½ 5.53 12.2
5 - 3 5.17 11.4
5 - 2½ 4.76 1 .5
6 - 5 9.39 2 .7
6 - 4 8.35 18.4
6 - 3½ 7.85 17.3
6 - 3 7.44 16.4
8 - 6 17.78 39.2
8 - 5 16.1 35.5
8 - 4 14.7 32.4
10 - 8 32.3 71.2
10 - 6 27.76 61.2
10 - 5 25.72 56.7
12 - 10 5 .58 111.5
12 - 8 43.77 96.5
12 - 6 38.42 84.7

ASME SB366 UNS N10276 Pipe Fittings Testing Methods

ASME SB366 UNS N10276 Pipe Fittings Testing Methods

Purchase UNS N10276 Stub End at Low Price, Check Nickel C276 Long/ Short Radius Elbow Temperature Limit

Alloy C276 Elbow Temperature Range

Description Temperature in °F Temperature in °C
Hastelloy C276 Fittings 1600°F to 2250°F 872 °C to 1233 °C

Nickel Alloy C276 Reducer Dimensions

NPS OD Reducers
Reduced from in inches inches mm Eccentric & Concentric Length in inches Reduced to in inches
1/2     1 1/2 3/8
0.84 21.3 1/4
3/4     2 1/2
1.05 26.7 3/8
1 1.315 33.4 2 3/8
1 1/4     2 3/4
1.66 42.2 1/2
    1
1 1/2 1.9 48.3 2 1/2 1/2
    1
    1 1/4
2 2.375 60.3 3 3/4
    1 1/4
2 1/2 2.875 73 3 1/2 1
    1 1/2
3 3.5 88.9 3 1/2 1
    2
3 1/2 4 101.6 4 1 1/4
    2
    3
4 4.5 114.3 4 1 1/2
    2 1/2
    3 1/2
5 5.563 141.3 5 2
    3
    4
6 6.625 168.3 5 1/2 2 1/2
    3 1/2
    5
8 8.625 219.1 6 3
    4
    6
10 10.75 273.1 7 4
    6
12 12.75 323.9 8 5
    8

UNS N10276 Buttweld Fittings Pressure Rating

Temp. Ratings Pressure Ratings Class
(°C) (°F) Class 150# Class 300#
2 1/2 - 3 in. 1 1/4 - 2 in. 1/4 - 1 in.
-29 to 66 -20 to 150 300 1000 1500 2000
93 200 265 910 1350 1785
121 250 225 825 1200 1575
149 300 185 735 1050 1360
177 350 150 650 900 1150
204 400   560 750 935
232 450   475 600 725
260 500   385 450 510
288 550   300 300 300

Hastelloy C276 Tee Dimension

Hastelloy C276 Equal Tee Dimension

NPS 1/2 1 1 1/2 2 1/2 3 1/2 5 8 12 16 20 22 24
OD at bevel 21.3 33.4 48.3 73 101.6 141.3 219.1 323.8 406.4 508 559 610
Center-End Outlet (M) 25 38 57 76 95 124 178 254 305 381 419 432
Run (C) 25 38 57 76 95 124 178 254 305 381 419 432