-
Call
+91-22-23841700
-
Email
export@ashtapad.com
Inconel 600 Flanges
ASTM B564 UNS N06600 RTJ Flange and Nickel Alloy 600 Blind Flange Supplier in India
The ASTM B564 UNS N06600 Slip on Flanges ranges from ½ to 24 inches of nominal bore size. After matching the flange to the outer diameter of the pipe this flange is welded with the help of a fillet weld. These flanges are ideal for seamless pipes because they are easy to slide onto them. Nickel 600 RTJ Flanges is a circular flange having a circular groove to accommodate a ring gasket. These flanges are used when there is mating amongst flanges, and a metal-to-metal seal is required. All our products are produced using the best raw materials and cutting-edge technology following international and national standards.
The UNS N06600 Blind Flanges is a flange fixed at the end of a pipe to stop or curtail the flow. These can either be welded or fixed with bolts. UNS N06600 Blind Flanges is another flange that can be bolted or welded at the end of pipelines. This flange can be bolted on two pipes with a gasket between them. Alloy 600 Forged Flanges helps combine two machinery parts and provides support in a piping system. If you want to know more about our flanges or want to customize them, contact us. We are proud to be the leading Inconel 600 Flanges manufacturers in India; our ultimate aim is to produce high-quality products at reasonable rates.
Inconel 600 Flanges
ASTM B564 UNS N06600 Slip on Flanges
Nickel 600 RTJ Flanges
Table of Contents
- Standard Specification of Inconel 600 Flanges
- Dimensions of ASTM B564 Inconel 600 Lap Joint Flanges
- Check Nickel Alloy 600 Flanges Price List
- Chemical Equation of ASTM B564 UNS N06600 Slip on Flanges
- Mechanical Characteristics of Nickel 600 RTJ Flanges
- Material Equivalent of Inconel 600 Weld Neck Flange
- Most popular types of 600 Inconel Flanges
- Weight Chart Of 15mm (1/2") Nickel 600 Flange
- Pressure-Temperature Rating for 600 Alloy Forged Flanges
- ASTM B564 UNS N06600 Weld Neck Flange Standards
- ASME Standard of Inconel UNS N06600 Flanges
Manufacturer of Ni Alloy 600 Slip on Flange in Mumbai, View Specification
Standard Specification of Inconel 600 Flanges
UNS N06600 Weld Neck Flange Specific Heat
- 0.106 Btu/lb-°F
- 444 J/kg-°C
ASTM B564 UNS N06600 Socket Weld Flange Curie Temperature
- -192 °F
- -124 °C
Ready Stock of Inconel Alloy 600 Lap Joint Flange Size Range 1/2 to 48 Inch
Inconel 600 Flanges Size
- Size in NPS :
- 1/2 to 48 inch
ASTM B564 Inconel 600 Reducing Flange Density
- 8.47 g/cm3
- 0.306 lb/in.3
ASME SB564 Inconel 600 Reducing Flange Available in Schedule 5 to 160
Alloy 600 Blind Flange Schedule
- Schedule :
- 5 to XXS
Inconel N06600 Reducing Flange Melting point
- 2470 - 2575 °F
- 1354 - 1413 °C
Din 2.4816 Socket Weld Flange Pressure Rating Class 150 to 2500
DIN 2.4816 Threaded Flange Pressure Class
- Class :
- 150# to 2500#
Nickel Alloy 600 Slip on Flange Dimensional Standard
- Standard :
- ASME B16.5
Inconel 2.4816 Lap Joint Flange Characteristics
- Strength and Stability
- Oxidation resistance
- Nitriding Resistance
- Nitriding Resistance
Inconel 6600 Plate Flanges Suitable for
- Sulfuric Acid
- Nitric Acid
- Organic Acid
- Seawater
Alloy Type
- Ni-Cr-Fe
Elongation
- 35 %
Ni Alloy 600 Pipe Flange Tensile Strength
- 515 MPa
Inconel Alloy 600 Forged Flange Yield Strength
- 170 MPa
Inconel 600 Forged Steel Flanges Common Trade Name
- Inconel 600®
- Ferrochronin® 600
- Nickelvac® 600
Alloy 600 Weld Flanges Requirements
- NACE MR0175
- Sour service
- ISO 15156
- NACE MR0103
- NACE TM-0284
UNS Number
- N06600
WERKSTOFF NR.
- 2.4816
SB 564 UNS N06600 Hot Forged Flange Testing Methods
- Material inspection
- Impact test
- Hardness test
- Tensile test
- Shell pressure test
- Visual inspection
- PMI test
- NDT test
ASTM B564 N06600 Forged Pipe Flange Manufacturing Technique
- Forged
- Drilling
- Turning
- CNC machining
- Rolled
- Milling
Inconel 600 Flanges Thread types
- NPT
- FPT
- MPT
- BSPP
- MNPT
- BSPT
- FNPT
- BSP
UNS N06600 Weld Neck Flange Value Added Services
- CNC machined
- Forging
- Casting
- Polishing
- Beveling end
- Cutting
- Sand Blasting
- Rolling
Alloy 600 Blind Flange International Specifications
- BS 3072-3076
- DIN 17742
- DIN 17754
- DIN 17750
- TÜV 305
- AFNOR-NC 15 Fe
Inconel 600 Blind Flange Features
- Malleable
- High strength
- Precisely designed
- Excellent conductivity
- Corrosion resistant
- High strength
ASTM B564 UNS N06600 Blind Flanges Types
- Inconel 600 Raised Face Blind Flange
- Alloy 600 Forged Blind Flange
- Inconel N06600 Ring Type Joint Blind Flange
- ASME SB 564 N06600 Threaded Blind Flange
- Alloy 600 Flat Face Blind Flange
Inconel 600 Slip on Flanges Types
- ASTM B564 UNS N06600 Threaded Slip on Flange
- Inconel 6600 Flat Face Slip on Flange
- UNS N06600 Forged Slip on Flange
- DIN 2.4816 Ring Type Joint Slip on Flange
- ASTM B564 Inconel 600 Raised Face Slip on Flange
Other Types of Nickel Alloy 600 Flanges
- Alloy 600 Swivel Flange
- Inconel 600 High Hub Blind Flange
- ASTM B564 Inconel 600 Reducing Flange
- Inconel N06600 Anchor Flange
- UNS N06600 Ring Spacer Flange
- ASME SB 564 N06600 Spade Flange
- Alloy 600 Orifice Plate
- ASTM B564 UNS N06600 Expander Flange
Types of Inconel 600 Flanges
- Nickel Alloy 600 Socket Weld Flanges
- Inconel 6600 Weld Neck Flanges
- SB 564 UNS N06600 LWN Flanges
- Inconel Alloy 600 Slip on Flanges
- Ni Alloy 600 Blind Flanges
- DIN 2.4816 Backing Flange
- Inconel 2.4816 Lap Joint Flanges
- ASTM B564 N06600 Threaded Flanges
- Inconel 600 Reducing Flange
Faces Types of Inconel Alloy 600 Nippolet Flanges
- Flat face
- Ring joint
- Raised face
- Lap joint
- Large and small tongue and groove
- Male and female
Number of Holes for ANSI B16.5 Alloy 600 Slip On Flanges
- 150# :
- 12 holes
- 300# :
- 16 holes
- 400# :
- 16 holes
- 2500# :
- 12 holes
- 600# :
- 16 holes
- 900# :
- 20 holes
- 1500# :
- 16 holes
Inconel 2.4856 Weld Neck Flanges Types
- SB 564 UNS N06600 Raised Face Weld Neck Flange
- Inconel 600 Flat Face Weld Neck Flange
- Nickel Alloy 600 Ring Type Joint Weld Neck Flange
- Inconel 2.4816 Long Weld Neck Flange
ASTM B564 Inconel 600 Threaded Flanges ASME standards
- ASME B16.5
- ASME B16.36
- ASME B16.20
- ASME B16.47
Inconel Din 2.4816 Spectacle Blind Flanges finish
- Zinc Plated
- Concentric Serrated
- Serrated finish
- Spiral Serrated
- Mirror finish
- Smooth Finish
- Cold Water Finish
Nickel Alloy 600 Industrial Flanges Marking
- Manufacturers Name
- Material grade
- Face type
- Origin
- Sizes
- Standard
- Pressure class
WNR 2.4816 Long Weld Neck Flange Test Certificates
- Raw Materials Certificate
- Third Party Inspection
- MTC EN 10204 3.1/3.2
- 100% Radiography Test Report
ASTM B564 UNS N06600 BLRF Flanges Other standards
- Europe :NiCr15Fe
- OR : ЭП760
- Japan : NCF 600
- Russia : МНЖМц 28-2,5-1,5
- BS : NA 13
Dimensions of ASTM B564 Inconel 600 Lap Joint Flanges
| Size in mm | 15 | 25 | 40 | 65 | 90 | 125 | 200 | 300 | 400 | 500 | 600 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size in Inch | 1/2 | 1 | 1 1/2 | 2 1/2 | 3 1/2 | 5 | 8 | 12 | 16 | 20 | 24 | |
| OD | A | 90 | 110 | 125 | 180 | 215 | 255 | 345 | 485 | 595 | 700 | 815 |
| Lapped Thick. | C | 16 | 17 | 22 | 29 | 32 | 36 | 44 | 56 | 87 | 103 | 111 |
| Flange Thick. | B | 30 | 49 | 65 | 90 | 122 | 164 | 246 | 365 | 457 | 559 | 663 |
| Lapped ID | D | 22.9 | 34.9 | 50 | 75.4 | 104.1 | 144.4 | 222.2 | 328.2 | 411.2 | 514.4 | 616 |
| PCD | E | 60.3 | 79.4 | 98.4 | 139.7 | 177.8 | 215.9 | 298.5 | 431.8 | 539.8 | 635 | 749.3 |
| Lapped Radius | 3 | 3 | 6 | 8 | 11 | 11 | 13 | 13 | 13 | 13 | 13 | |
| Lapped Thick. | G | 11.2 | 14.3 | 17.5 | 22.3 | 23.9 | 23.9 | 28.6 | 31.8 | 36.6 | 42.9 | 47.9 |
| No of Bolts | 4 | 4 | 4 | 4 | 8 | 8 | 8 | 12 | 16 | 20 | 20 | |
| Machine Bolt Length | 50 | 55 | 65 | 75 | 75 | 85 | 90 | 100 | 115 | 140 | 150 | |
| Bolt Size UNC | 1/2 | 1/2 | 1/2 | 5/8 | 5/8 | 3/4 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | |
| Hole Size | 5/8 | 5/8 | 5/8 | 3/4 | 3/4 | 7/8 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1 3/8 | |
| RF Stud Length | 55 | 65 | 70 | 90 | 90 | 95 | 110 | 120 | 135 | 160 | 170 | |
| Weight in kg | 0.8 | 0.9 | 1.4 | 3.2 | 5 | 6.8 | 13.7 | 29 | 54 | 75 | 100 | |
| ISO Stud Size | M14 | M14 | M14 | M16 | M16 | M20 | M20 | M24 | M27 | M30 | M33 |
Check Nickel Alloy 600 Flanges Price List
| Inconel 600 Flanges Price | Price in USD | Price in UAE Dirham |
|---|---|---|
| BLIND FLANGE 2 150# RF ASME B16.5 50-150RF-INCONEL 600 | 248.00 USD | AED 910.97 |
| INCONEL ALLOY 600 FLANGE ASME SB564 UNS N06600 ASME B16.5 3NB SCH 10 | 529.24 USD | AED 1943.99 |
| DN25 Cls 1300 Alloy 600 forged flange | 388 USD | AED 1425.14 |
| DN50 Cls 1300 ASME B16.5 N06600 forged flange | 490.87 USD | AED 1802.99 |
| Sch 80 SB 564 UNS N06600 Flange | 320.67 USD | AED 1177.84 |
| Sch 10 ANSI B16.5 Alloy 600 Flanges | 890.10 USD | AED 3269.38 |
| ASME B16.5 Sch 80 Nickel Alloy 600 Flange | 598.07 USD | AED 2196.74 |
Chemical Equation of ASTM B564 UNS N06600 Slip on Flanges
C :
0.15 max
Si :
0.50 max
Cu :
0.50 max
Ni :
72 min
Mn :
1 max
S :
0.015 max
Fe :
6 to 10
Cr :
14 - 17
Mechanical Characteristics of Nickel 600 RTJ Flanges
| Element | Density |  |
Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.47 g/cm3 | 310 MPa | |||
| Inconel 600 | Melting Point | Tensile Strength | 40 % | |
| 2580 °F / 1413 °C | 655 MPa |
Material Equivalent of Inconel 600 Weld Neck Flange
| STANDARD | WERKSTOFF NR. | North America (UNS) | Japan | British Standard | Russia | France | Europe |
|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Most popular types of 600 Inconel Flanges
Inconel 600 Weld Neck Flange
Inconel UNS N06600 Blind Flanges
ANSI B16.5 Nickel Alloy 600 Slip On Flanges
600 Inconel Plate Flanges
UNS N06600 Socket Weld Flanges
Alloy 600 Forged Flanges
ASTM B564 Inconel 600 Threaded Flanges
Inconel 600 Spectacle Blind Flange
Inconel DIN 2.4816 Socket Weld Flanges
Alloy 600 Blind Flanges
600 Alloy Weld Neck Flange
Inconel 600 Industrial Flanges
ASME SB564 Alloy 600 Lap Joint Flange
1/2" Class 300 Inconel 600 Flange
ASTM B564 Inconel Alloy 600 Pipe Flanges
600 Nickel alloy Lap joint flange 1/2" 300# DN15
Weight Chart Of 15mm (1/2") Nickel 600 Flange
| CLASS | 400 lb | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal Pipe Size | ½ | 1 | 1½ | 2½ | 3½ | 5 | 8 | 12 | 16 | 20 | 24 |
| Slip On | 2 | 3.5 | 6.5 | 12 | 21 | 31 | 67 | 130 | 253 | 378 | 539 |
| Threaded | 2 | 3.5 | 6.5 | 12 | 21 | 31 | 67 | 130 | 253 | 378 | 539 |
| Socket Weld | 2 | 3.5 | 6.5 | 12 | 21 | 31 | 67 | 130 | 253 | 378 | 539 |
| Lap Joint | 2 | 3.5 | 6.5 | 11 | 20 | 29 | 64 | 152 | 280 | 420 | 615 |
| Blind | 2 | 4 | 8 | 15 | 29 | 44 | 100 | 226 | 398 | 621 | 936 |
| Weld Neck | 3 | 4 | 8 | 14 | 26 | 43 | 89 | 175 | 295 | 445 | 640 |
Pressure-Temperature Rating for 600 Alloy Forged Flanges
| ANSI/ASME B16.34 | PRESSURE RATING CHART | ||||||
| Temperature °F | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
| -20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
| 200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
| 300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
| 400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
| 500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
| 600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
| 650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
| 700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
| 750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
| 800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
| 850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
| 900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
| 950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
| 1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
| 1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
| 1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
| 1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
| 1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
| 1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
| 1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
| 1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
| 1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
| 1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
| 1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
ASTM B564 UNS N06600 Weld Neck Flange Standards
ASME Standard of Inconel UNS N06600 Flanges
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
|---|