-
Call
+91-22-23841700
-
Email
export@ashtapad.com
Inconel 625 Pipe Fittings
Manufacturer of Nickel Alloy 625 Elbow in India, Refer Dimensions of UNS N06625 Reducer
Inconel 625 is made up of nonmagnetic nickel-alloy. The Inconel 625 Fittings are made of these components along with molybdenum making it resistant to corrosion. These fittings also don’t deform easily under elevated temperatures. The DIN 2.4856 Buttweld Fittingshave different pressure classes from 1000-10000psi. These fittings have good ductility, formability, and weldability than other highly alloyed nickel materials. These fittings are used in applications in chemical processing, pollution control, industries, nuclear reactors, and marine industries. We are one of the top Inconel 625 Fittingsmanufacturers in Indiawho focus on creating high-quality products at the most reasonable prices.
The Inconel 625 fittings come in different types. The Nickel Alloy 625 Elbow is used to change the direction of the line. These elbows are used in high-temperatures as it has a high melting point of 1350 degrees C. The 625 Inconel Long Radius Elbow is the most commonly used. In a long radius elbow, the radius of curvature of the elbow is not similar to that on the outside of the pipe. All our products can be customized into different shapes and sizes as per your requirements.
The UNS N06625 Reducercan be either concentric or eccentric and is used to adapt to pipes of different sizes. It is also put in use when the flow of fluids or gases is expanded or reduced. The ASTM UNS N06625 Buttweld Reducing Tee is produced by welding one metal over the other. This tee has 3 openings of which one’s diameter is reduced to adapt the pipe to the opening. All our products are manufactured from the best products and making use of the latest technology. If you have any queries about our products or pricing, contact us.
Inconel 625 Fittings
Alloy 625 Pipe Elbow
UNS N06625 Reducer
Table of Contents
- Inconel 625 Pipe Fittings Specification
- Prices of Nickel Alloy 625 Pipe Fittings
- Inconel 625 Pipe Fittings Chemical Composition
- Mechanical Strength of UNS N06625 Reducer
- Inconel 625 Reducer Equivalent Material
- List of DIN 2.4856 Buttweld Fittings Types
- Standard Specification of UNS N06625 Fittings
- Pressure Rating of NCF 625 Fittings
- ASME SB366 UNS N06625 Buttweld Fittings Sizes
- Physical Properties oF Alloy 625 Tee
Supplier of Din 2.4856 Tee in Mumbai, View Dimensions & Sizes of Alloy 625 Buttweld Fittings
Inconel 625 Pipe Fittings Specification
Inconel 625 Pipe Fittings Sizes
- Seamless : 1/2" - 24"
- Welded : 24 - 96"
Alloy 625 Elbow Size
- 1/2 to 48
Alloy Inconel 625 Tee UNS
- N06625
Inconel 6625 Reducer Werkstoff nr
- 2.4856
DIN 2.4856 Long Radius Elbow Schedule
- 5 to XXS
Nickel Alloy 625 Seamless Pipe Fittings Service Temperatures
- 982°C / 1800°F
Inconel Alloy 625 Stub End Manufacturing Technique
- Mandrel
- Hot forming
Nickel 625 Welded Pipe Fittings JIS standard
- JIS B2313
- JIS B2312
2.4856 Inconel Eccentric Reducer Coating
- FBE coated
- Varnished
- Anti rust light oiling
- PE coating
- Hot-dip galvanizing
- Back painting
Werkstoff 2.4856 BW Fittings American Standard
- MSS-SP-43
- ANSI / ASME B16.9
- MSS SP-25
- ANSI/ ASME B16.25
- ANSI/ ASME B16.28
ASTM Standard
- ASTM B366
- ASME SB366
Dimensional Standard
- ASTM, SAE, ASME, DIN, ISO, BS, AMS and EN
UNS N06625 Fittings Testing Methods
- Magnetic Particle Examination
- Hyrdrostatic test
- Positive Material Identification
- HIC tested
- Ultrasonic test
AMS 5581 Pipe Bend Radius
- 3D
- 4D
- 5D
- 6D
- 8D
- 10D
Thermal Conductivity
- 9.9 W/(m.K)
Magnetic Permeability
- <1.001
Buy Nickel Alloy 625 Short and Long Radius Elbow With MTC EN 10204 3.1/3.2
Requirements Meet for WNR 2.4856 Buttweld Fittings
- NACE MR0103
- HIC tested
- NACE TM-0284
- Sour service
- IBR
- MTC EN 10204 3.1/ 3.2 certificate
- ISO 15156
- NORSOK
- NACE MR0175
Nickel 625 Pipe Bending Method
- Roll Bending
- Hot Induction Bending
- Mandrel Bending
- Rotary Draw Bending
- Ram-Type Bending
Dimensional Standard
- ASME B16.9
Density
- 8.44 g/cm3
- 0.305 lb/in.3
Marking for UNS 6625 SR Elbow
- Dimensional standard
- Manufacturers name
- Grade
- Size
- Heat number
Nickelvac® 400 Fittings Packaging
- Carton Box
- Wooden Pallet
- Custom
- Wooden Cases
Hot Forming Temperature Ranges
- 927 to 1177°C
- 1700 to 2150°F
Solution Annealing Temperature Ranges
- 2000 to 2200°F
- 1093 to 1204°C
Inconel 625LCF Pipe Bend Angle
- 15°
- 22.5
- 30°
- 45°
- 60°
- 90°
- 135°
- 180°
Inconel 625 Fittings Types
- UNS N06625 Pipe Bend
- Inconel 2.4856 Stub End
- Inconel 625lcf Reducer
- Alloy 625 Gr 1 Cross
- Nickel 625 Elbow
- Nickel Alloy 625 Tee
- Inconel 6625 Cap
ASTM B366 N06625 Cross Suitable Fluids
- Air
- Gas
- Water
- Oil
- Steam
Types of Alloy 625 Gr 1 Pipe Bend
- Inconel 625 Grade 1 5d Pipe Bend
- Alloy 625 L Bend
- Inconel 625 Welded Pipe Bend
- Nickel 625 J Bend
- Wnr 2.4856 Short Radius Bend
- Alloy 625 Gr 2 Hot Induction Bend
- Din 2.4856 Seamless Pipe Bend
- UNS 6625 Piggable Bend
- Inconel 625 Grade 2 2.5d Pipe Bend
- 2.4856 Inconel Mitered Pipe Bend
- Alloy Inconel 625 Return Bend
- Werkstoff Nr. 2.4856 22d Pipe Bend
- AMS 5581 10d Pipe Bend
- Inconel Alloy 625 Long Radius Bend
- UNS N06625 3d Pipe Bend
Types of Alloy 625 Gr 2 Elbow
- Inconel 2.4856 8d Elbow
- Inconel 625lcf Seamless Elbow
- Alloy 625 Gr 1 Welded Elbow
- Nickel 625 Reducing Elbow
- 180° Short Radius Nickel Alloy 625 Elbow
- 45° Short Radius Inconel 6625 Elbow
- Inconel 625 Grade 1 Long Radius Elbow
- 60° Alloy 625 Elbow
- 180° Inconel 625 Elbow
- 180° Long Radius Nickel 625 Elbow
- 90° Wnr 2.4856 Elbow
- 45° Alloy 625 Gr 2 Elbow
- 45° Long Radius Din 2.4856 Elbow
- UNS 6625 5d Elbow
- Inconel 625 Grade 2 1d Elbow
- 120° 2.4856 Inconel Elbow
- 90° Short Radius Alloy Inconel 625 Elbow
- 30° Werkstoff Nr. 2.4856 Elbow
- 22.5 Degree AMS 5581 Elbow
- Inconel Alloy 625 Short Radius Elbow
- UNS N06625 1.5d Elbow
- Inconel 2.4856 3d Elbow
- Inconel 625lcf 2d Elbow
- 90° Long Radius Alloy 625 Gr 1 Elbow
Types of Inconel 625 Grade 1 Tee
- Nickel 625 Buttweld Tee
- Nickel Alloy 625 Lateral Tee
- Inconel 6625 Barred Tee
- Inconel 625 Grade 1 Equal Tee
- Alloy 625 Straight Tees
- Inconel 625 Y Tee
- Nickel 625 Reducing Tee
- Wnr 2.4856 Saddle Tee
- Alloy 625 Gr 2 Reducing Outlet Tees
- Din 2.4856 Swept Tee
Types of Inconel 625 Grade 2 Cap and Stub End
- UNS 6625 Short Stub End
- Inconel 625 Grade 2 Lap Joint Stub End
- 2.4856 Inconel Collar
- Alloy Inconel 625 Butt Welded Hemi-head Pipe Cap
- Werkstoff Nr. 2.4856 Long Stub End
Types of Inconel 625 Cross
- AMS 5581 Straight Crosses
- Inconel Alloy 625 Reducing Outlet Crosses
- ASTM B366 UNS N06625 Unequal Cross
- Nickel Alloy 625 Equal Cross
Types of Alloy 625 Swage Nipple
- Alloy 625 Eccentric Swage Nipple
- Inconel 625 Concentric Swage Nipple
Types of Alloy Inconel 625 Reducer
- Alloy 625 Eccentric Reducer
- Inconel 625 Concentric Reducer
End types of Nickel Alloy 625 Elbow
- Beveled Both Ends
- Treaded Both Ends
- Plain large end
- Treaded large end
- Beveled small end
- Plain small end
- Treaded small end
- Plain Both Ends
- Beveled large end
Inconel Alloy 625 Pipe Fittings Equivalent Standard
- UNS : N06625
- EN : NiCr22Mo9Nb
- WERKSTOFF NR. : 2.4856
- GOST : ХН75МБТЮ
- AFNOR : NC22DNB4M
- BS : NA 21
- JIS : NCF 625
Melting Range
- 2350 - 2460 °F
- 1290 - 1350 °C
Melting Range
- 2370 °F - 2460 °F
- 1300 °C - 1350 °C
Tensile Strength
- 135000 Psi
- 930 MPa
Yield Strength
- 75000 psi
- 705 Mpa
Specific heat
- 0.098 Btu/lb/°F
Curie Temperature
- -190 °C
- < -320 °F
Young's Modulus
- 205 x 10 N/MM2
Annealed Temperature
- 871 °C
- 1600 °F
Elastic Modulus
- 207
Electrical Resistivity
- 10.3 nΩ.m
Nonmagnetic / Magnetic
- Nonmagnetic
Common Trade Names of Inconel 625 Fittings
- Inconel 625®
- Altemp® 625
- Chornin® 625
- Nickelvac® 625
- Nicrofer® 6020
- Haynes® 625
ASTM B366 Inconel 625 Fittings Value Added Services
- Forging
- Rolling
- Pickling
- Cladding
- Bending
- Heat Treatment
- Polish
- Cutting
Inconel 625 Buttweld Fittings Application
- Aerospace
- Oil & Gas
- Chemical Processing
- Power Generation
- Petro Processing
- Marine
Stockholder of High Quality NCF 625 Stub End With Pickled and Polishesd Finish, Check Price List
Prices of Nickel Alloy 625 Pipe Fittings
| Sizes | Type | Unit | Price in USD | Price in UAE Dirham |
|---|---|---|---|---|
| 1/2" | Elbow | per piece | $ 50 - 150 | AED 183.65 - 550.95 |
| 3/4" | $ 70 - 200 | AED 257.11 - 734.60 | ||
| 1" | $ 100 - 300 | AED 367.30 - 1101.90 | ||
| 3" | $ 300 - 700 | AED 1101.90 - 2571.11 | ||
| 4" | Tee | $ 700 - 1500 | AED 2571.11 - 5509.51 | |
| 6" | $ 1000 - 2500 | AED 3673.01 - 9182.52 | ||
| 1/2" to 1/4" | Reducers | $ 100 - 250 | AED 367.30 - 918.25 | |
| 1-1/2" to 1" | $ 250 - 500 | AED 918.25 - 1836.50 | ||
| 4" to 3" | $ 700 - 1500 | AED 2571.11 - 5509.51 | ||
| 8 NB X 6 NB SCH 80 SEAMLESS | BW FITTING | $ 2590.55 | AED 9515.12 |
Inconel 625 Pipe Fittings Chemical Composition
C :
0.10 max
Si :
0.50 max
Cu :
-
Ni :
58 min
Mn :
0.50 max
S :
0.015 max
Fe :
5 max
Cr :
20 - 23
ASTM B366 UNS N06625 Elbow Testing Methods
Check ASME B16.9 625 Inconel Concentric / Eccentric Reducer Equivalent and Mechanical Properties
Mechanical Strength of UNS N06625 Reducer
| Element | Tensile Strength |  |
Melting Point | Elongation |
|---|---|---|---|---|
| 930 MPa | 1350 °C (2460 °F) | |||
| Inconel 625 | Yield Strength | Density | 42.5 % | |
| 517 MPa | 8.4 g/cm3 |
Inconel 625 Reducer Equivalent Material
| STANDARD | Europe | Russia | Germany | Japan | North America | France | British Standard |
|---|---|---|---|---|---|---|---|
| Inconel 625 | NiCr23Fe | ХН75МБТЮ | 2.4856 | NCF 625 | N06625 | NC22DNB4MNiCr22Mo9Nb | NA 21 |
List of DIN 2.4856 Buttweld Fittings Types
DIN 2.4856 Buttweld Fittings
Inconel 625 Reducer
Nickel Alloy 625 Pipe Fittings
625 Inconel Long Radius Elbow
ASTM UNS N06625 Buttweld Reducing Tee
NCF 625 Stub End
ASME B16.9 625 Inconel Concentric Reducer
Inconel 625 DIN 2.4856 Fittings
Nickel 625 End cap
Inconel 625 Tube Fittings
ASTM B366 Inconel Alloy 600 Buttweld Fittings
High pressure inconel 625 Alloy 8 inch to 6 inch pipe fitting eccentric reducer
Long type inconel 625 the elbow butt welding pipe fitting
ASME SB366 UNS N06625 Weld Fittings
ASTM B366 WPNCMC Inconel 625 elbow
Seamless Astm Inconel 625 Nickel Alloy Sch 40 Concentric Reducer
Standard Specification of UNS N06625 Fittings
| UNS No | N06625 |
|---|---|
| International Specifications: | WNR. 2.4856 |
| Specifications | ASTM B366 |
Pressure Rating of NCF 625 Fittings
| Pipe Size | Inch | 1" | 1 1/2" | 2" | 3" | 4" | 5" | 6" | 8" | 10" | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Schedule | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | 40 | 160 | ||
| Outside Diameter | Inch | 1.315 | 1.315 | 1.9 | 1.9 | 2.375 | 2.375 | 3.5 | 3.5 | 4.5 | 4.5 | 5.563 | 5.563 | 6.625 | 6.625 | 8.625 | 8.625 | 1 .75 | 1 .75 | |
| Wall Thickness | Inch | .133 | .25 | .145 | .281 | .154 | .344 | .216 | .438 | .237 | .531 | .258 | .625 | .28 | .719 | .322 | .906 | .365 | 1.125 | |
| Temperature (°F) | 100 | 16700 | 2205 | 4493 | 1629 | 3362 | 1371 | 3283 | 1301 | 2787 | 1102 | 2611 | 965 | 2474 | 877 | 2382 | 771 | 2298 | 699 | 2289 |
| 200 | 16700 | 2205 | 4493 | 1629 | 3362 | 1371 | 3283 | 1301 | 2787 | 1102 | 2611 | 965 | 2474 | 877 | 2382 | 771 | 2298 | 699 | 2289 | |
| 300 | 16700 | 2205 | 4493 | 1629 | 3362 | 1371 | 3283 | 1301 | 2787 | 1102 | 2611 | 965 | 2474 | 877 | 2382 | 771 | 2298 | 699 | 2289 | |
| 400 | 15500 | 2047 | 4170 | 1512 | 3120 | 1272 | 3047 | 1208 | 2587 | 1023 | 2424 | 896 | 2296 | 814 | 2211 | 716 | 2133 | 649 | 2124 | |
| 500 | 14400 | 1902 | 3874 | 1404 | 2899 | 1182 | 2831 | 1122 | 2403 | 950 | 2552 | 832 | 2133 | 756 | 2054 | 665 | 1982 | 603 | 1974 | |
| 600 | 13500 | 1783 | 3632 | 1317 | 2717 | 1108 | 2654 | 1052 | 2253 | 891 | 2111 | 780 | 2000 | 709 | 1925 | 623 | 1858 | 565 | 1850 | |
| 650 | 13200 | 1743 | 3552 | 1287 | 2657 | 1083 | 2595 | 1028 | 2203 | 871 | 2064 | 763 | 1955 | 693 | 1883 | 610 | 1817 | 553 | 1809 | |
| 700 | 12900 | 1703 | 3471 | 1258 | 2597 | 1059 | 2536 | 1005 | 2153 | 851 | 2017 | 746 | 1911 | 677 | 1840 | 596 | 1775 | 540 | 1768 | |
| 750 | 12600 | 1664 | 3390 | 1229 | 2536 | 1034 | 2477 | 982 | 2103 | 831 | 1970 | 728 | 1866 | 661 | 1797 | 582 | 1734 | 528 | 1727 | |
ASME SB366 UNS N06625 Buttweld Fittings Sizes
| NPS | inch | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 3 1/2 | 4 | 5 | 6 | 8 | 10 | 12 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | inch | 0.84 | 1.05 | 1.315 | 1.66 | 1.9 | 2.375 | 2.875 | 3.5 | 4 | 4.5 | 5.563 | 6.625 | 8.625 | 10.75 | 12.75 | ||
| millimeter | 21.3 | 26.7 | 33.4 | 42.2 | 48.3 | 60.3 | 73 | 88.9 | 101.6 | 114.3 | 141.3 | 168.3 | 219.1 | 273.1 | 323.9 | |||
| 90° Elbows | SR | Center to Face | inch | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 3 1/2 | 4 | 5 | 6 | 8 | 10 | 12 | ||
| LR | Center to Face | inch | 1 1/2 | 1 1/8 | 1 1/2 | 1 7/8 | 2 1/4 | 3 | 3 3/4 | 4 1/2 | 5 1/4 | 6 | 7 1/2 | 9 | 12 | 15 | 18 | |
| 45° Elbows | LR | Radius | inch | 3 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 12 | 15 | 18 | ||||
| Center to Face | inch | 5/8 | 7/16 | 7/8 | 1 | 1 1/8 | 1 3/8 | 1 3/4 | 2 | 2 1/4 | 2 1/2 | 3 1/8 | 3 3/4 | 5 | 6 1/4 | 7 1/2 | ||
| 180° Returns | LR | Back to face | inch | 1 7/8 | 1 11/16 | 2 3/16 | 2 3/4 | 3 1/4 | 4 3/16 | 5 3/16 | 6 1/4 | 7 1/4 | 8 1/4 | 10 5/16 | 12 5/16 | 16 5/16 | 20 3/8 | 24 3/8 |
| Center to Center | inch | 2 | 2 1/4 | 3 | 3 3/4 | 4 1/2 | 6 | 7 1/2 | 9 | 10 1/2 | 12 | 15 | 18 | 24 | 30 | 36 | ||
Physical Properties oF Alloy 625 Tee
| Grade | Density (g/cm3) | Curie Temperature | Thermal Conductivity W.m -1.°K-1 | Permeability (15.9 kA/m) | Elastic Modulus | Electrical Conductivity (IACS @ 20°C) | Specific Heat J.kg-1.°K-1 | Poisson's Ratio @ 20°C | Electrical Resistivity |
|---|---|---|---|---|---|---|---|---|---|
| (0-100°C) | |||||||||
| 625 | 8.42 |
|
9.9 | 1.0006 | 207 GPa | 1.3 % | 460 | 0.278 | 10.3 nΩ.m |