Nickel Alloy Plate

Refer Dimensions and Sizes of Alloy 200 Sheet, Buy Nickel Alloy Strip/ Coil Directly From Manufacturer in India

Alloys are used to manufacture various plates and sheets. They can be either carbon, steel, or Nickel Alloy plates. These plates display resistance to severe corrosion and greater strength. However, if no chromium is added to the alloy then the resistance to corrosion may decrease. These plates can also be used in diluted solutions of sulfuric and hydrochloric acid. It also offers resistance to alkalis that are caustic. Nickel Alloy Strip also performs well in marine environments by resisting cavitation corrosion. It offers good ductility and is easy to weld and solder. They are also said to generate high thermal and electrical conductivity.

Check Nickel alloy sheet Price List, Get a Quote of UNS N02200 Strip

Alloy 200 Sheet provides decent magnetic and mechanical properties. Therefore these alloy sheets are also known as ferromagnetic alloys. Exposure of this grade to a temperature range of 800 degrees F to 1200 degrees F leads to precipitation of carbon phase and loss of ductility. In case one is searching for an alloy sheet for application above 600 degrees F then Nickel 201 Plates are used. Resistance to creep needs to be considered as a designing factor for applications whose service temperature reaches 800 degrees F. Cold working these plates increases the tensile strength of these plates significantly.

Nickel 200 Plate is made up of commercially pure wrought nickel. They display resistance in neutral salt solutions as well. However, the metal comes under severe attack and corrodes in an oxidizing environment. They also have the ability to resist dry chlorine and hydrogen chloride. JIS NW 2201 Foil functions well in reducing conditions. They are widely used in soap industries to make soap. In the case of the formation of a passive oxide film on the plate then they can also be used in an oxidizing environment. UNS N02200 Coil is widely used in industries such as power generation, seawater equipment, pulp and paper, condenser, pharmaceutical, and gas processing.

Nickel Alloy Plate

Material Specification of Nickel Alloy Plate

Specification Brass
Thickness 0.1mm to 100 mm Thk
Stock in form of Rolling Plate, Plate, Sheet, sheared, Coils, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, hot rolled, cold rolled, annealed, Flat Sheet, Foils, Rolls, Blank (Circle), soft annealed, descaled, Plain Sheet, tread plate, Flat Shim, Checker Plate
Value Added Service Heat Treatment, Bending, Forging, Pickling, Annealed, Cutting, Minor Fabrication, Cladding, Polish, Rolling Etc.
Finish Cold rolled sheet (CR), 2B, BA NO(8), Hot rolled plate (HR), 2D, SATIN (Met with Plastic Coated)
Condition Polished on both sides
Export to Singapore, Indonesia, Egypt, Oman, USA, Ireland, Brazil, Korea, Iran, Spain, Canada, Dubai, Ukraine, India, Saudi Arabia, Thailand, Peru, etc
Temper Annealed
Dealers & Distributor of TATA, JINDAL, POSCO, JISCO, SAIL, ESSAR, INDIAN, LISCO, TISCO, BHUSHAN, BAOSTEEL IMPORTED material
Width 10-2500mm

Size chart of 200 Nickel Plate

Size (in inches) Size (in mm)
.125" 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" 4.75mm
.250" 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" 12.7mm
.601" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm

Price List of Nickel Alloy Plate

Price list of Nickel Plate Nickel Alloy Plate Price in INR Ni Sheet Price in USD Ni Alloy Plate Price in UAE Dirham
NICKEL ALLOY PLATE (SIZE 15 X 350 X 5100 mm) Per Kg INR 2,195 29.46 USD 108.21 UAE Dirham
Nickel GRADE 200 Sheet, WIDTH BELOW 600MM Per Kg INR 69 0.93 USD 3.40 UAE Dirham

Looking to Buy Nickel Coil from Suppliers, Biggest trader of small-quantity Nickel 201 Plate

Electrical Resistivity of UNS N02200 Strip

Electrical Resistivity 0.096 µΩ/m at 20°C

Nickel 201 Clad Plate Mean Linear Expansion

Temperature Range Coefficient of Expansion
°F °C 10-6 in/in °F µm/m °C
-423 -200 4.7 10.1
-300 -100 5.8 11.3
-200 20 6.2
-100 100 6.3 13.3
0 200 13.9
70 300 14.2
200 400 7.4 14.8
400 500 7.7 15.3
600 600 8.0 15.5
800 700 8.3 15.8
1000 800 8.5 16.2
1200 900 8.7 16.6
1400 1000 8.9 16.9
1600 1100 9.1 17.1
1800   9.3  
2000   9.5  

Nickel 200 Plate Dimensions

Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
Polished, brushed 0.5–4.0 max. 1524
2H – Work hardened 0.4–6.35 max. 1524

Imperial Dimensions

Surface finish Gauge (in) Width (in)
Temper rolled Mexinox only 13–29 max. 48
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
BA Mexinox only 18–28 max. 48
2D – Cold rolled, heat treated, pickled 12–24 max. 60
Polished (not brushed) 11–24 max. 60
Buy high purity nickel plate At Factory Price, Check Dimension of JIS NW 2201 Foil

Composition Standard of Nickel Alloy Strip

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Mechanical Analysis of Pure nickel sheet

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 / 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

High Purity Nickel Plate Equivalent Material

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 - LC-Ni 99
Supplier of Nickel 200 Plate at reasonable cost, View Available Sizes & Thickness of DIN 2.4066 Shim Stock

Specific Heat of Nickel Alloy Chequered Plate

Specific Heat 456 J/kg-°K (0—100°C)

JIS NW 2201 Foil Applications

  • Aerospace and Missile Components
  • Chemical and Petrochemical Processing
  • Food Processing Equipment
  • Marine and Water Treatment

List of Nickel Alloy Plate Types

Refer what and Where Ashtapad Overseas Supplies?

0.2mm thickness nickel alloy strip Dammam -KSA, Indonesia, Philippines, Belgium
Nickel Hot Rolled Sheet United Kingdom -UK, Europe, Malaysia, UAE
Nickel Alloy 201 Cold Rolled Coil Egypt, Spain, Mexico, UK
Grade Ni Alloy #8 Finish Sheet United Arab Emirates (UAE), Turkey, Norway, Malaysia
ASTM B127 Alloy 200 Coil UK, Canada, Poland, Ellington -United States
Nickel Alloy Perforated Sheet Malaysia, Taiwan, Los Alamos -Mexico, Philippines
Nickel Alloy NiMo16Cr15W #4 Finish Sheet Europe, Japan, Romania, Malaysia
ASTM B127 200 2B Finish Sheet Philippines, Malaysia, Canada, Singapore
UNS N02200 Sheets Philippines, France, Australia, UK, Nigeria
ASME SB 127 201 Nickel Alloy Plates South Africa, Saudi Arabia (KSA), Kuwait, Brazil
INOX 2.4068 Sheets Oman, Malaysia, Hong Kong, UAE
Nickel alloy 4*8FT Strip Czechia, Germany, Thailand, Malaysia
Nickel Alloy NW 2200 Sheets Singapore, South Korea, NY 12203 (USA), Malaysia
Ni201 Pure nickel sheet Chile, Italy, Iran, Singapore
Nickel Alloy Sheet #4 Brushed Finish Sweden, Colombia, Malaysia, China
200 Nickel Alloy Slit Coils Netherlands, Malaysia, Russia, Dubai
NW 2200 HR Coil Bahrain, South Africa, Singapore, Singapore
0.2mm pure nickel plates Qatar, France, Europe, Thailand
AISI 200 CR Strips Malaysia, USA, Bangladesh, Finland