S355 grade is a low carbon and manganese steel alloy. The EN 10210 S355J2 Pipe is made up of this low carbon alloy. This pipe had properties that makes welding it possible at the same time, has good impact resistance. It can also be employed to be used in low temperatures. These pipes are used at MTR mass transit in railways, airports, and also as a transmission tower. The 0.22% of low carbon S355J2 Seamless Pipes are ductile, hard, strong, and is resistant to corrosion. The diameters of this seamless pipe vary from 4mm-219mm, while the wall thickness is between 0.5mm- 20mm. These pipes are not as hard as carbon steel pipes but due to carburizing these pipes have increased surface hardness. As a result, these pipes are used in critical structural applications. We provide the best EN 10210 S355J2 steel Pipe at reasonable rates.
The S355J2H EN 10210 Carbon Steel Pipes are used for mechanical as well as structural functions. Our workers ensure that the top quality raw materials are used, and the best pipes are produced which meet your requirements perfectly. Another low carbon pipe is the bs en 10210 s355j2h Welded Pipe. This pipe is also known as mild pipes. It has 017% carbon along with 140% manganese. This composition helps in welding the pipe as well as forming different shapes from this pipe.
The S355J2 Welded CHS Tube can be customized to your needs. These welded pipes are characterized by their strong construction and can withstand any pressures put on them. This pipe is quite reliable, affordable and has a superior finish.
|Size||OD 13.7-1214 MM|
|Wall Thickness||1.0 To 40 mm|
|Export to||Dubai, Iran, Spain, Canada, Ireland, Brazil, Thailand, Egypt, Saudi Arabia, Singapore, Indonesia, Ukraine, Korea, Oman, India, USA, Peru, etc|
|Length||6 To 12 Meter & as per Custom Size|
|Type||Rectangular, Round, Square
ERW, Seamless, Welded, Fabricated
|Surface Finish||Shot blasting, Hairline, Black, Anti Corrosive, Oiled, Paint, Mirror, Black Phosphating, Galvanized|
|End Type||Bevel, Screwed, Threaded, Plain|
|S355J2H (1.0576)||max 0.22||max 0.55||max 1.6||max 0.03||max 0.03|
|Tensile Strength Rm N/mm2: 3 ≤ T ≤ 100mm||470 – 630|
|Yield Strength ReH Min, N/mm2: T ≤ 16mm||355|
|Min Elongation % T ≤ 40mm on gauge length 5.65. √S0||22|
|Impact properties Minimum Ave energy (J) at -20°C||27|
|Hot Forming||Heat Treatment|
|Temperature°C||Cooling Type||Normalizing 1″||Stress relieving anneal 2″||Cooling Type|